Waste gas treatment equipmentThe key is to use different process technologies to recover or remove and reduce harmful components in waste gas to protect the ecological environment and purify indoor air。 This is also a special environmental protection equipment for industrial production sites (such as processing plants), and the waste gas generated by the production workshop should be pre-treated before being discharged to the outside world to meet domestic environmental standards。 Turn on the exhaust exhaust device。

      In the waste gas treatment method, choosing the right waste gas treatment equipment is very important for the waste gas to solve the qualified emission。 Because the exhaust gas is not static, many data and information are fluctuating, which also immediately affects the actual effect of the equipment。 Therefore, in the whole process of the operation of the waste gas treatment equipment, which aspects will be affected by the waste gas？

Recommended exhaust gas treatment equipment operation factors:

      1.Exhaust gas concentration

      Each waste gas treatment equipment usually has its proper solution concentration, the concentration is too high, and the actual solution effect is not very good, and can not meet the emission standards。 If it is too low, it will inevitably lead to additional operating costs。 Therefore, after the supplier chooses the appropriate exhaust gas treatment equipment according to the exhaust gas concentration, the exhaust gas emission concentration should be controlled within the solution concentration range of the equipment。

      2.Exhaust gas composition

      The composition of the exhaust gas emitted by many processing plants is very complex, and the treatment technology to solve this problem is also relatively complex。 For sulfur content and chloric acid based exhaust gases, equipment must be protected from corrosion。

      3.Temperature and humidity of the exhaust gas environment

      The concentration of waste gas and the ambient humidity not only affect the actual dissolution effect of waste gas treatment equipment, but also exceed the dissolution range of waste gas treatment equipment, resulting in abnormal operation of waste gas treatment equipment, which will inevitably affect the actual dissolution of waste gas treatment equipment。 Exhaust equipment。

      4.Emission of particulate matter

      If there are granular chemicals in the exhaust gas, the accumulation in the treatment method is less and less, which can easily lead to the burden of solving the exhaust gas treatment equipment, and even affect the actual effect of the exhaust equipment。 Therefore, before solving the exhaust gas, it is necessary to pretreat the particles in the exhaust gas to intercept the particles to prevent the normal operation of all exhaust equipment。

      There are many factors that can affect the actual effect of waste gas treatment equipment。 Gas is only one of the factors, there are other factors, such as human factors, natural environment and other factors。 When purchasing waste gas treatment equipment, it is necessary to introduce the basic information of exhaust gas concentration, exhaust gas composition, exhaust gas temperature, ambient humidity and exhaust gas particles to the exhaust gas treatment equipment dealer in as much detail as possible。 The purchase of waste gas treatment equipment should be based on the specific situation, low cost, low energy consumption, no secondary pollution, and as far as possible to ensure green environmental protection。 After the official delivery and use of the purchased product, the relevant data and information about the exhaust gas must be manipulated within the scope of the equipment solution, and there is no opportunity。